Описания процессов
- Overview
- Bleached oil high level monitoring
- Oil feed to polishing stage
- Boiler temperature and pressure
- Differential pressure over the filter
- Steam ditribution and load control
- Polished oil to deaerator monitoring
- Extracted oil from deodoriser
- Temperature balance over stripping column
- Temperature balance over stripping column
- Stripper packet DP monitoring
- Stripper head vacuum measurement
- Steam supply for deodoriser
- Circulation flow pressure measurement
- Disatillate cooling
- Fatty acid recirculation to stripper
- Final distillate
- Recirculate temperature
- Refined bleached deodorized product
Fatty acid separation in the palm oil production
Instrumentation Enabling Heat Recovery Processes for Improved Energy Efficiency in Fatty Acid Separation
Fatty acid separation is basically achieved in a combined stripper/distiller, where odours are removed at the same time: the fatty acids can be separated according to their different boiling points. Preheated fatty acid feed is made to flow through a series of reaction chambers.
Each reaction chamber is heated at the bottom, typically by superheated steam, which is injected into the feed in each chamber through a sparger. The low pressure imposed in the reaction chamber and the high temperature of the feed and the superheated steam flow all agitate and evaporate the fatty acids, in a form of distillation.
The vapours are led to a pipe header and condensed in a water-cooled condenser. The steam passes through, travelling on to the barometric condenser: the non-condensable gases are removed by a vacuum pump. The residue leaving the base of the last reaction chamber is cooled. In all these process steps measurements of pressure and temperature are crucial. One disadvantage of steam distillation of fatty acids is the formation of emulsions in the last stage of condensation, where a water spray is used. The calcium and magnesium salts typically present in the water spray react with the fatty acids forming soaps.
To recover the fatty acids, the soap is acidified and redistilled if desired.
Требования к данной позиции измерения
- Overfilling prevention
- SIL 2/3 certified for safety-related applications
Рекомендуемые изделия и системы
Требования к данной позиции измерения
- High accuracy mass flow and density measurement
- Device commissioning, verification, diagnostics and monitoring via a secure wireless Bluetooth
Рекомендуемые изделия и системы
Требования к данной позиции измерения
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- High pressure overload resistance
Рекомендуемые изделия и системы
Требования к данной позиции измерения
- Filter DP monitoring
Рекомендуемые изделия и системы
Требования к данной позиции измерения
- Integrated gross and net heat calculation
- Integral pressure and temperature compensation (option)
Рекомендуемые изделия и системы
Требования к данной позиции измерения
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Different connection heads available (IP54…IP68)
Рекомендуемые изделия и системы
Требования к данной позиции измерения
- High accuracy mass flow control for deodoriser
- Integrated temperature measurement
Рекомендуемые изделия и системы
Требования к данной позиции измерения
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Applications with low to medium pressures and flow velocities
Рекомендуемые изделия и системы
Требования к данной позиции измерения
- Thermowell material: 1.4404 / 316L or 1.4571 / 316Ti
- Applications with low to medium pressures and flow velocities
Рекомендуемые изделия и системы
Требования к данной позиции измерения
- Monitoring of packet condition
Рекомендуемые изделия и системы
Требования к данной позиции измерения
- Process control
Рекомендуемые изделия и системы
Требования к данной позиции измерения
- Optimized deodorization
- Full compensation of temperature and pressure
Рекомендуемые изделия и системы
Требования к данной позиции измерения
- Process control
Рекомендуемые изделия и системы
Требования к данной позиции измерения
- Bi-directional flow measurement over a wide dynamic range
- Cost-saving installation without grounding rings
Рекомендуемые изделия и системы
Требования к данной позиции измерения
- Optional heating jacket available
- For extended process temperature ranges
Рекомендуемые изделия и системы
Требования к данной позиции измерения
- High accuracy mass, density and volume flow measurement
- Cost-effective twin straight tube Coriolis mass flowmeter
Рекомендуемые изделия и системы
Требования к данной позиции измерения
- Compression fitting connection
- Ex works with optional temperature transmitter
Рекомендуемые изделия и системы
Требования к данной позиции измерения
- High accuracy mass, density and volume flow measurement
- Cost-effective twin straight tube Coriolis mass flowmeter